20/02/2023 – FX 3370 by Textest — auf Deutsch lesen

Air Permeability Tester SpotAir

Presented at the Filtech from February 14th to 16th in Cologne: The new FX 3370 Air Permeability Tester SpotAir.

Das-neue-FX-3370.jpg

Presented at the Filtech from February 14th to 16th 2023 in Cologne: the new FX 3370 Air Permeability Tester SpotAir. © Textest

 

The new FX 3370 Air Permeability Tester SpotAir, which is currently in the final stage of development, determines the Air Permeability, the Pressure Drop and the Specific Flow Impedance at the moving web.

The measuring module can be used manually for spot and profile measurements, in which case it is powered by a battery. If a continuous profile measurement is required, the same module can be mounted to the frame of the production line. For continuous use, up to five modules can be linked together and operated from a single PC. Depending on the number of measuring modules, up to five length profiles over the entire width of the material can be displayed.

When the SpotAir is used manually, the results of spot measurements are shown on the display of the instrument and profiles are saved on a USB flash drive for later transfer to a PC. During continuous use, the profiles are displayed, evaluated and documented in real time by the same PC that also operates the system.

Further articles for: